• Availability: Blocks, Cut to size, Tiles, Slabs, Pavers, Poolcoping

• Thickness : All thicknesses

• Quarry Owner: Yes

• Surface Finishes: Honed, Polished, Brushed, Flamed , Flamed & Brushed Sandblasted, Sandblasted & Brushed, Bush Hammered, Bush-Hammered & Brushed

   

   

  	Residental	Commercial
  Floors
  Walls
  Shower Floors
  Shower Walls
  Countertops
  Backsplash
  Pools (pool areas, not inside the pool)
  Steps & Risers
  Interiors
  Exteriors
  Fireplaces

  
  

1. Technical and Physical Properties

1.1 Water Absorption Rate (%): 2,1

(Indicates porosity and suitability for wet or outdoor areas.)

1.2 Abrasion Resistance (cm3/50cm2): 20,57

(How well the stone withstands foot traffic or wear)

1.3 Compressive Strength (MPa): 117.08

(Ability to withstand heavy loads (important for paving, cladding))

1.4 Flexural/Bending Strength (MPa): 13.9

Critical for thin panels and overhanging surfaces.

1.5 Density (kg/m³): 2601

1.6 Mohs Hardness: 4.5

(Scratch resistance)

1.7 Slip Resistance: 

(R-rating or coefficient):

(Especially important for outdoor, poolside, or commercial spaces.)

1.8 Frost Resistance: High

Needed for cold climate exterior applications.

1.9 Salt Resistance: High

Important for coastal areas and salt water pools.

2. Surface Finish Options

2.1 Available Finishes:

polished

honed

Brushed/Antique

flamed

Flamed & brushed,

sandblasted

Sandblasted & Brushed

Bush-hammered,,

tumbled, antiqued, etc.)

2.2 Finish Performance:

(depends on surface of choice)

2.3 Maintenance Requirements by Finish:

(please inquire)

3. Aesthetic Qualities

3.1 Base Color Tone:

(depends on selection of choice)

3.2 Veining Pattern:

Web-like

3.3 Fossil Content:

Fossil visibility depends on surface of choice

3.4Color Stability Over Time:

Surface does not patinate, color variations will homogenise over time if under constant sunlight, dark veins will become less visible.

3.5 Texture:

Depends on surface of choice

3.6 Light Reflectivity:

Depends on surface of choice

4.    Color Characteristics

4.1 Base Color Tone:

Depending on selection of choice; Rich green, turquoise, light olive,  (may seem beige under sunlight)

4.2 Color Variation:

stable

4.3 Color Stability:

color variations will homogenise over time if under constant sunlight, dark veins will become less visible.

4.4 Tone Changes in Light:

May appear as beige under sunlight

5.   Veining and Fossil Pattern

5.1 Vein Type:

web-like

5.2 Fossil Visibility:

Depends on surface finish of choice

5.3 Fossil Type:

Shell fossils, coral patterns, ancient microfossils

5.4 Fossil Pattern Style:

scattered, clustered,

6.   Texture (Visual and Tactile)

6.1 Surface Texture:

Depends on surface finish of choice

6.2 Pattern Movement:

Depends on surface finish of choice

6.3 Grain Size:

None

7.   Natural Effects

7.1 Depth Perception:

Depends on surface finish of choice

7.2 Luminosity: reflective

Depends on surface finish of choice

7.3 Organic Character:

Depends on surface finish of choice

8.  Expanded Attributes for Finish Performance

These describe how the surface behaves technically and visually after a finish is applied:

8.1 Slip Resistance

Depends on surface finish of choice

8.2 Slip Rating:

Depends on surface finish of choice

8.3 Foot Comfort:

Depends on surface finish of choice

8.4 Reflectivity and Light Behavior

Depends on surface finish of choice

8.5 Gloss Level:

Depends on surface finish of choice

8.6 Light Interaction:

Depends on surface finish of choice

9. Durability of the Finish

9.1 Finish Lifespan Outdoors:

Maintains texture for years, color variations will homogenise over time if under constant sunlight, dark veins will become less visible.

9.2 Resistance to Fading:

color variations will homogenise over time if under constant sunlight, dark veins will become less visible.

10. Surface Hardness After Finish

10.1 Hardness Increase or Decrease:

N/A

11. Ease of Maintenance

Depends on surface finish of choice

11.1 Cleaning Requirements:

Depends on surface finish of choice

12. Surface Feel

12.1 Tactile Sensation:

Depends on surface finish of choice

13.  Formats and Sizes

13.1 Tile Sizes:

30xFL, 30x60, 30x120, 40x40, 40x60, 40x80, 50x100, 60x60, 60x90, 60x120,

All custom dimensions and dimensions up to slab dimensions possible

Please inquire for dimensions below 30x30.

13.2 Slab Sizes:

2cm, 3 cm, 4 cm, 5 cm, 6 cm, 7 cm for all finishes except for tumbled.

2cm, 3 cm, 4 cm, 5 cm, 6 cm, 7 cm, 8 cm, 9 cm, 10 cm, 11 cm, 12 cm, 13 cm, 14 cm, 15 cm for flamed surfaces.

Option 1: Export Quality;

Minimum 160x270 cm and above dimensions.

Unwanted dark spots, undesirable fossil formations and any faults that hinder aesthetics are eliminated.

Lower minimum dimensions means faster delivery times.

Option 2: Price performance;

140x200 cm and above dimensions

13.3 Custom Cut-to-Size Availability:

All manner of custom dimensions possible.

Please inquire for mosaics and small dimensions below 30x30.

13.4 Thickness Options:

1 cm: honed/polished surfaces up to the 40x80 cm dimension

1,2 cm: honed/polished/flamed/flamed & brushed/sandblasted/sandblasted & brushed surfaces up to the 40x80 cm dimension.

1,5 cm: honed/polished/flamed/flamed & brushed/sandblasted/sandblasted & brushed surfaces up to the 40x80 cm and 60x60 cm dimension.

All dimensions possible for 2 cm, 3 cm, 4 cm, 5 cm, 6 cm, 7 cm thicknesses.

13.5 Edge Options:

Bevelled, eased edge, bullnose, half bullnose, pencil round edge, drop edge, honed,

Please inquire for custom profiles.

13.6 Edge Finish Options

Honed, flamed, sandblasted…

Please inquire for custom finishes and for profiles.

14. Durability and Suitability for Application

14.1 Indoor/Outdoor Suitability

Heavy Traffic Suitability: due to high abrasion resistance and high structural integrity, Rustic Green is a viable alternative for heavy traffic applications like commercial plazas, airports, malls etc.

14.2 Submersion Suitability:

Suitable to apply in salt-water pools and low chlorine pools and fountains.

14.3 Furniture Use:

Due to high reistance to hot and cold, a popular choice.

15.   Sustainability and Ethical Sourcing

15.1 Origin of Stone: North of Turkey, Black sea Region (Karabük)

15.2 Sustainable Extraction Practices:

We have installed solar panels on our Ankara Factory and now have the capability of being independent of the local grid. Reducing our Co2 emissions significantly.

We are committed to reforesting the areas of our quarry that have been fully extracted, restoring the natural landscape and reducing our environmental impact.

15.3 Certifications Available:

(ISO, LEED credits, CE markings)

16.   Maintenance and Longevity

16.1 Ease of Cleaning: easy

16.2 Sealing Requirements: Please inquire

16.3 Resistance to Staining/Etching: High

High scratching resistances make Rustic Green a good alternative for kitchen or vanity applications

16.4 Expected Patina Development: No

17.   Commercial and Supply Information

17.1 Production Capacity:

300,000 m2 production capacity for our Ankara Factory

35,000 m3 block production capacity.

17.2 Stock Availability:

On-demand production as default. For regular clients that provide a PO schedule and guarantee their adherence to said schedule, stock material options are possible.

17.3 Lead Times for Delivery

Depends on order and factory production schedule availability. Please inquire.

17.4 MOQ (Minimum Order Quantities):

FOB price quotations for full container inquiries and Ex-factory for LCL inquiries.

17.5 Price Range:

Standard export quality pricing and price-performance pricing quotations possible

17.6 Packing and Crating Methods:

Crate packaged with certified heat treated cross hatch constructed crates

17.7 Project References and Case Studies

17.8 Past Projects:

Please see our reference page. Link:

17.9 Performance History:

Please see the physical and chemical analysis in the pdf section of our website

18.   Customizability and Services

18.1 Fabrication Possibilities:

For projects of high complexity, provided via contract manufacturing to and with trusted partners sharing the same quality standards as us.

Please inquire for CNC carving, waterjet cutting, 3D patterns, inlays etc.

Surface finish and selection variations can be granted on request

18.2 Design Consultation Services Available:

Samples displaying selection and surface of choice provided upon demand, mockups can be done and advice provided on technical matters upon request.

18.3 After-Sales Support: Yes